Configuring the HUAWEI HG8245A (H) Modem

At one great time, an inexpensive, high-quality modern model appeared in the lineup of modems, thanks to the presence of two antennas, providing signal quality throughout the dwelling (and as practice shows) and beyond. Consider how to configure the HUAWEI HG8245A or HG8245H modem.

Connection

First of all, the modem needs to be connected to the PC. This is done using the wire that comes with the device. One of the ends is connected to the LAN port (this is the port through which the connection to the local network goes). The second is connected to the computer (laptop).

After connecting to the address bar of the launched browser (any that is available), you must enter 192.168.100.1 (this is the IP address of the modem data by default). Recommended browsers - Internet Explorer, Yandex, Firefox.

In response, a window will appear asking for your login and password:

Possible options for login / password:

With the login "telecomadmin" possible values ​​for the password:

  • Admintelecom (for comprehensive terminal reconfiguration);
  • NWTF5x% RaK8mVbD;
  • NWTF5x%;
  • nE7jA% 5m;

Or a username / password combination —root / admin (to change the settings of a Wi-Fi network only).

If this window does not appear, we check other data in the settings of the network card:

After checking and typing the username with a password, we get into the debug menu of the functions of the optical terminal, we begin to configure.

Customization

It includes moving and setting data for several folds (pages):

WAN tab

Configuring the HUAWEI HG8245A modem starts by moving to the “WAN” page.

It should be noted:

  • Connection by 4_INTERNET_R_VID_10;
  • WAN Mode: Route WAN value;
  • User Name: your contract number;
  • Password: password value;
  • On the contrary SSID1 should be checked;
  • Settings are saved by clicking the "Apply" button.

LAN page

On this tab:

  • At the top of the left side of the panel, select “DHCP Server ...”;
  • Check the three top lines: “Enable primary ...”, “Enable DHCP ...” and “Enable Option 125”;
  • Enter the values ​​for “Primary DNS” as in the picture;
  • We also deal with the value for “Secondary Server”;
  • Confirm entered by clicking "Apply":

Wi-Fi setup

Wi-Fi setup for our Byflaymodem is made from the WLAN tab. In it:

Set a tick in the upper part near “Enable WLAN”;

Further to the right of it, press "NEW";

The “SSID Name” field must contain the name of the Wi-Fi network;

Tick ​​marks next to “Enable SSID”, “Broadcast SSID” and “Enable WMM”;

The value of "Number of Associated ..." says about the number of simultaneously connected devices;

The remaining fields must match the picture;

Pressing the “Apply” button will save the entered settings:

After reading our article, you have already understood that setting up a Byfly Huawei HG8245H modem is not particularly difficult.

Customize, leave comments about your successes, share them with friends.