If several years ago, printers were most often installed in offices, then at the present time almost every computer owner acquires this printer in order to expand its capabilities.

Even a novice can fill the cartridge for the HP DeskJet 1510 printer.

If you observe which printer is purchased more often for home use, you can definitely note that the inkjet. Such a printer model demonstrates sufficient print speed, and is also accompanied by an acceptable cost of cartridges. Regardless, most users want to save financial costs in order to refill the printer.

One of the most effective ways to save money is refilling printer cartridges yourself. Of course, in this case, you will not have to resort to the services of masters in the service centers, respectively, to bear the additional costs that follow. If you own an HP Deskjet 1510 printer, we are ready to offer you instructions, after studying which you will absolutely understand what actions to take, in what sequence, to ensure a high-quality refueling of your device.

Rules refueling device

After you run out of ink on your HP Deskjet 1510 printer, you will be faced with a choice of what to do next to ensure its subsequent operation. Of course, if the printer does not print, you will have to choose between purchasing new cartridges and refilling existing ones. Of course, the acquisition every time new consumables can not be considered a rational decision, so users are trying to fill those that are available.

TIP. It is recommended not to delay the process of refilling, since prolonged storage of the cartridges of the HP Deskjet 1510 printer provokes drying up of the print head. If this happens, it is unlikely that you will be able to independently restore her performance. In this case, specialists subject consumables to thorough washing, but even such methods sometimes cannot “resurrect” the printhead, which is why you have to throw out the cartridge, and instead buy a new one.

Ink addition algorithm

So, if you have decided to learn how to refill cartridges yourself, we recommend that you initially develop the habit of checking the ink levels systematically in order not to miss the moment when it is best to refill the consumables.

IMPORTANT. Refill is already needed when the ink level is lowered. The problem is that to ensure the printing of the HP Deskjet 1510 printer or other inkjet analog, there is a strong warming up of the nozzles providing the ink ejection. At the moment of release, it is the ink that begins to cool the nozzles, which is why their combustion is excluded. If the ink is not enough, they will not be able to cool the nozzles, provoking their final failure. In this case, you definitely have to accept the release of these consumables and the acquisition of new ones.

So, if your HP Deskjet 1510 printer is no longer printing, or you notice that the ink level has dropped to a critical value, we recommend that you refill the cartridge by following our proposed algorithm. Turn on your printing device, open the top cover and remove the consumables, place it on the table, which previously, in order to avoid excessive contamination by dyes, you must cover the paper or film.

Take the cartridge in your hands, carefully remove the protective sticker from it, freeing the hole through which you will be able to insert the ink. Take a pre-prepared syringe, type in it about 6 ml of ink. We draw your attention to the fact that the syringe must be clean, since any trace of old paint, mixing with new ink, can provoke undesirable consequences, up to the exit from the system of the consumable.

Insert the needle of the syringe into the hole and insert the ink very slowly. The haste is rejected because it is important that the adsorbent inside the cartridge has time to absorb the ink. Otherwise, your haste may lead to the fact that the entire consumables will be filled with paint, and you will not be able to fill the HP Deskjet 1510 printer with high quality.

Remove the syringe from the cartridge, wipe the drips with wet wipes, return the sticker you previously removed, closing the filling hole. It remains for you to insert the consumables into the HP Deskjet 1510 printer, start a test page to print and make sure that it prints at a high quality level.

If something does not suit you, especially how your device prints, we recommend performing the ink pumping procedure, because in most cases this happens when nozzles are clogged.

If you do not print a color printer, you should fill up with such a special cartridge. The principle of operation remains exactly the same. A special feature is that under the sticker you will find several filling holes. Of course, you should not rush, and without haste to figure out which holes you need to inject ink of a certain color shade.

In rare cases, a situation arises when you refill cartridges, but your printer still does not print, accompanying your refusal with an error message. The fact is that it is extremely profitable for a manufacturer to purchase consumables as often as possible, so a certain moment comes when the cartridge is still able to function, but the computer recognizes it as worthless and therefore does not allow printing.

In order to prevent the occurrence of such an undesirable error for your device, it is recommended to click the printer shortcut in advance with the right key, then go to the “Properties” parameter. In the window that opens, select the “Port” tab, at the very bottom will be the “Allow two-way data exchange” offer, by default, a check mark is ticked near this line.

Uncheck this box, after which, unfortunately, you will not be able to see the ink level when printing, but at the same time the risk of such a fatal error will be excluded.

So, having familiarized yourself with why problems arise after self-charging consumables, having studied the algorithm of actions, how to inject ink, you can immaculately perform all these actions not only independently, but also qualitatively, not inferior in terms of skill level even to service center specialists.