Windows Error 0x80070035 “No Network Path Found” - Causes and Solutions

Users of Microsoft Windows 10 can connect the computer to another. The OS also allows you to use the same network to access the necessary folders and files without a cable connection. Unfortunately, when trying to connect as a guest, some users encounter the error 0x80070035 “The network path was not found”. So many technical problems can lead to this error. Therefore, we have a number of methods to correct this nasty error 0x80070035, “The network path was not found”.

Resolving Windows Error 0x80070035 "Network path not found."

Ipv4 protocol activation

You may have heard the news: the latest blocks of IPv4 addresses on the Internet have been highlighted. The fundamental basic technology that enables the use of Internet protocol addresses (was the number 99.48.227.227 ever met on the network? This is an IP address), since the beginning of the Internet will soon be exhausted. However, the new technology will take its place. The successor to IPv4 is IPv6, a system that not only offers much more numeric addresses, but also simplifies address assignment and additional network security features. However, the transition from IPv4 to IPv6 is likely to be a rough one. Most people are unfamiliar with IPv4 and IPv6, especially since the potential impact of switching to IPv6 on their lives may be less.

IPv4 means Internet Protocol version 4. It is the basic technology that allows you to connect our devices to the network. When the device connects to the Internet (PC, Mac, smartphone, or other gadget), it is assigned a unique numeric IP address, for example, 99.48.227.227. To send data from one computer to another via the Internet, a data packet containing the IP addresses of both devices must be transmitted over the network. Without IP addresses, computers will not be able to communicate and send data to each other. This is important for the infrastructure of the Internet.

IPv6 is the sixth Internet Protocol version and the successor to IPv4. It functions similarly to IPv4 in that it provides the unique numeric IP addresses needed to communicate with devices connected to the Internet. However, it has one significant difference: it uses 128-bit addresses. IPv4 uses 32 bits for its Internet addresses. This means that it can support about 4.29 billion IP addresses. The number may seem large, but all 4.29 billion IP addresses have been assigned to various institutions, which has led to the crisis that we are facing today.

Let's clarify the situation: the addresses are not yet exhausted. Many of them are not used and are in the hands of institutions such as MIT, and companies such as Ford and IBM. You can assign more IPv4 addresses, and more will be sold (since IPv4 addresses are now a scarce resource), but they will become a scarce product over the next two years, until it creates a problem for the Internet. As already mentioned, IPv6 uses 128-bit Internet addresses. Therefore, it can support 340, 282, 366, 920, 938, 000, 000, 000, 000, 000, 000, 000 Internet addresses. This is so much that a hexadecimal system is required to display addresses. In other words, IPv6 addresses are more than enough for the Internet to work for a very, very long time.

The depletion of IPv4 addresses was predicted several years ago, so switching over the last decade has occurred. However, progress was slow - only a small part of the Internet switched to the new protocol. In addition, IPv4 and IPv6 essentially work as parallel networks — the exchange of data between these protocols requires special gateways. To make a switch, software and routers need to be modified to support a more advanced network. It will take time and money. The first real test of the IPv6 network took place on June 8, 2011, on World IPv6 Day. Google, Facebook and other well-known web companies have tested the IPv6 network to see what it is capable of and what more needs to be done to switch the world to a new network.

Initially, it will not have a serious impact on life. Most operating systems actually support IPv6, including Mac OS X 10.2 and Windows. However, many routers and servers do not support it, which makes it impossible to connect a device with an IPv6 address to a router or server that supports only IPv4. IPv6 is also still in its infancy, it has many bugs and security issues that still need to be fixed, which can lead to one giant mess. To correct the error in Windows (including 10), follow these steps:

  1. Press the Windows + R keys to bring up the Run dialog box.
  2. In the text area, type ncpa.cpl and click OK.
  3. PCM on the desired connection - "Properties".
  4. After the network properties wizard (whether wireless or Wi-Fi), find the “Connection uses the following items” field. Now click "Internet Protocol (TCP / IP) Version 4". Click the "Install" button just below this field.
  5. Now select “Protocol” and click “Add” in the wizard to select the type of network function.
  6. Network Protocol - Reliable Multicast Protocol - OK.

Change network security settings

The settings policy Windows allows you to manage settings on many PCs from a central location. However, if you have a stand-alone computer, you can achieve the same result with the local security policy editor or secpol.msc. Secpol is a way to manage various policies and security settings that define different behaviors on a PC. And this is a great way to provide a standard configuration of security policy on multiple PCs if you do not have a domain. To switch to the local security policy editor, type “secpol” in the Windows search bar and click on the applet that appears. After opening, you will see categories and options for changing a variety of different settings. Let's delve into some of the most common scenarios in which you will need to use a local security policy editor, for example, creating security policies and importing them to other PCs.

How to set password policy with secpol

Having a password policy is an excellent first step in improving the security of your Windows 10 computer. To set a password policy using the local security policy editor, you must first double-click “Account Policies” on the left side, and then click “Password Policy”. This will show you the various options for setting a password policy on your PC. At a minimum, you must change the minimum password age and its length. To do this, double-click the parameter “Minimum password length” and change it to any length you need.

Also notice the Explain tab. This tab is in every parameter that you open in the local security policy editor. This is a great way to find out exactly what this particular setting does and how it can affect your PC. Next, let's change the minimum password age. This requires the same steps as changing the minimum password length. Finally, for our password policy to really have any effect, it needs to be enabled. This is done by enabling the Password option to meet complexity requirements. Our password policy is now valid.

How to export and import security policies

And what if you want to transfer these settings to another PC? You can do this by exporting the configuration and importing it to another computer. After you have configured all the settings, you can click “Security Settings” in the main window and select the “Action” menu. This gives you the opportunity to export a policy. As soon as you click, you will be prompted to save the security settings file (INF) in the location of your choice. This .inf file is a text document containing all the settings you just set. Move this .inf file to another computer on which you want to change security settings, open the Local Security Policy application, as you did earlier, and click the Security Settings node. Click "Action" again and select "Import Policy". You will then be prompted to enter the .inf file that you just exported. After importing, the new PC will have all the settings that you have defined on another computer.

Local Security Policy Editor is a great tool for setting numerous security settings on your PC. And, using the import / export feature, you can replicate Group Policy functionality by applying standard security configuration on many workgroup computers. You can change network security settings to resolve error 0x80070035. The steps are as follows:

  1. Go to the Start menu from your computer, type secpol.msc in the search bar and press the Enter key.
  2. In the next console, select the Local Policies option, and then Security Settings on the left. Double-click on Network Security: LAN Manager Authentication Level.
  3. In the drop-down menu, select the option "Send LM and NTLM - use session security NTLMv2, if agreed." Click "Apply", then "OK" to save the changes.

Disable IPv6

Internet Protocol Version 6 (IPv6) is a new set of standard Internet protocols. IPv6 is a version of the Internet Protocol suite designed to meet your needs. IPv6 expands the scope of application, including peer-to-peer and mobile applications. IPv6 is enabled by default in Windows, for example, when you join your computer to a domain. To correct a network path error, follow our instructions. Enabling and disabling IPv6 in the properties of a network adapter can be used in Windows 7, Windows 8, Windows 8.1 and Windows 10:

  1. Open the control panel (icons) and tap / tap the Network and Sharing Center icon.
  2. Right-click or click on the desired network adapter (for example, “Wi-Fi”) and click / tap Properties.
  3. Check (enable) or deactivate (disable) the “Internet Protocol Version 6 (TCP / IPv6)” checkbox.
  4. When done, you can close the network connections if you want.

Enabling IPv6 for a specific network adapter can be used in Windows 8.1 and Windows 10:

  1. Open elevated PowerShell.
  2. Enter the command line for IPv6 for all network adapters. Write down the name of the network adapter (for example, "Wi-Fi") for which you want to enable IPv6.
  3. Type the following command in PowerShell with elevated permissions and press Enter.

Get-NetAdapterBinding -ComponentID ms_tcpip6

  1. Replace the adapter for your wireless network adapter (for example, “Wi-Fi”).
  2. When done, you can close PowerShell if you want.

Enable IPv6 for all network adapters:

  1. Open elevated PowerShell.
  2. Type the following command and press Enter.

Enable-NetAdapterBinding -Name "*" -ComponentID ms_tcpip6

  1. When done, you can close PowerShell with elevated permissions if you want.

Disable IPv6 for a specific network adapter:

  1. Open elevated PowerShell.
  2. Enter the following command in elevated rights in PowerShell and press Enter to see the current IPv6 status for all network adapters. Record the name of the network adapter (for example, “Wi-Fi”) for which you want to disable IPv6.

Get-NetAdapterBinding -ComponentID ms_tcpip6

  1. Type the following command and press Enter.

Disable-NetAdapterBinding -Name "Adapter Name" -ComponentID ms_tcpip6

  1. Replace the adapter name in the above command with the actual name of the network adapter (for example, “Wi-Fi”) from step 2 for which you want to disable IPv6.

For example: Disable-NetAdapterBinding -Name "Wi-Fi" -ComponentID ms_tcpip6

  1. When done, you can close PowerShell if you want.

Disable IPv6 for all network adapters:

  1. Open elevated PowerShell.
  2. Type the following command and press Enter.

Disable-NetAdapterBinding -Name "*" -ComponentID ms_tcpip6

Done!

Registry Edit

Run Registry Editor. To do this, use one of the following procedures, depending on your version of Windows:

  • Windows 8 — Press the Windows + R keys to open the Run dialog box. Type regedit.exe and click OK.
  • Windows 7 — Click Start, type regedit.exe in the search box, and then press ENTER.

In the Registry Editor, locate and click the following registry subkey:

HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ User Shell Folders

Find the following value:

Personal

Make sure that the "Data" field for the "Personal" value is the path to a valid network location. If you are unsure if this is a valid path, you can copy and paste it into Windows Explorer to determine if you have access to this location. If the path is currently unavailable because you are connected to another network or working offline, you can reconnect to that network and try to reopen or create a PST file. However, if the path in the private registry value is no longer valid, you can change this path by completing the remaining steps.

Double click the following value:

Personal

In the "Value" field, enter the correct path to the "My Documents" folder and click the "OK" button. The default data for this value is% USERPROFILE% \ Documents. Exit Registry Editor and restart the PC.

Starting Services

Here's how to check and re-enable the TCP / IP service of NetBIOS Helper in Windows 8 and other versions:

  • In the Windows Search bar, type Services and open Services from the list of results.
  • Navigate to TCP / IP NetBIOS Helper.
  • Right-click and open Properties.
  • In the “Startup type” section, select “Automatic” and confirm the changes.

Restart the computer and see if the problem is fixed.

Clear the cache and reset the settings.

One of the most effective solutions is clearing the DNS cache and resetting the network. To clear the cache, run the command line (type "cmd" in the Windows search field) and enter the following command here:

ipconfig / flushdns

Press Enter and wait for the operation to complete. After that, you also need to disable DNS caching:

  • Launch Task Manager;
  • On the Services tab, tap Dnscache;
  • Click the right mouse button and select "Disable".

Reboot the PC and see if cleaning the network settings helped to eliminate the error.

Enable SMB1 file sharing support.

To enable access to SMB1 in Windows 7:

  • Open a command prompt as an administrator;
  • Enter the following command:

Set-ItemProperty -Path "HKLM: \ SYSTEM \ CurrentControlSet \ Services \ LanmanServer \ Parameters" SMB1 -Type DWORD -Value 1 –Force

  • Close the command prompt and restart the PC for the changes to take effect.

To enable SMB1 in Windows 8:

  • Open the control panel and tap / tap the “Programs and Features” icon.
  • Click the "Enable or Disable Windows Features" link on the left.

The C: \ Windows \ System32 \ OptionalFeatures.exe file opens.

  • Check (enable) the SMB 1.0 / CIFS file sharing support checkbox / function and press / tap the OK button.

If you want, you can also enable only what you want - SMB 1.0 / CIFS Client or SMB 1.0 / CIFS Server. When everything is ready, click on the “Restart Now” button to immediately restart the computer and apply the changes.

To enable SMB1 in Windows 8.1 and 10:

  • Open a command prompt as an administrator;
  • Type the following command and press Enter to see if SMB1 is currently enabled.

Dism / online / Get-Features / format: table | find "SMB1Protocol"

  • Enter the following command:

Dism / online / Enable-Feature / FeatureName: "SMB1Protocol" -All

  • When prompted and ready, press y to restart your computer immediately to apply.

Done!

Disable the firewall

Windows Firewall is an invisible tool that protects our systems against all types of network threats, and it has been included with every version of Windows over the past decade. Since he is a “silent” ally, doing most of his work in the background, few users interact with him on a regular basis, and even fewer people know what kind of tool it is and how it works.

What is Windows Firewall?

Windows Firewall is a security application created by Microsoft and built into Windows to filter network data sent to and from your Windows system and block malicious connections and / or programs that initiate them. Windows Firewall was first included in Windows XP (back in 2001), and since then it has improved in every new version of Windows.

Until 2004, it was called the Internet Connection Firewall, and at the time it was a fairly simple and buggy firewall with many compatibility issues. Windows XP Service Pack 2 (SP2) changed its name to Windows Firewall, and introduced and improved basic features such as filtering and blocking incoming connections.

What Windows Firewall Does

Windows Firewall can provide your computer or device with protection against attacks from a local network or the Internet, but still provide you with access to the network and the Internet. Because Windows Firewall filters traffic that passes through your computer, it can also stop the types of malware that use network traffic to spread, such as Trojan horses and worms. Another useful feature is that it can filter both outgoing and incoming connections to your Windows computer and block unwanted ones. Брандмауэр использует предопределённый набор правил для обоих типов сетевого трафика, но его правила могут редактироваться и изменяться как пользователем, так и программным обеспечением, устанавливаемым пользователем. По умолчанию брандмауэр Windows позволяет выполнять множество задач, таких как работа в интернете, использование приложений для обмена мгновенными сообщениями, подключение к домашней группе в локальной сети, обмен файлами, папками и устройствами и т. д. Правила применяются по-разному в зависимости от профиля сети, установленного для активного сетевого подключения.

Большинство программ Windows, которым требуется доступ к интернету и сети, автоматически добавляют свои исключения в брандмауэр Windows, чтобы они могли работать правильно. Если они не добавляют такое исключение, брандмауэр Windows отображает предупреждение безопасности, в котором они просят вас разрешить им доступ к сети. По умолчанию брандмауэр Windows устанавливает флажок, соответствующий используемому сетевому подключению. Вы можете выбрать один из вариантов или оба, в зависимости от того, что вы хотите сделать. Если вы хотите разрешить программе подключаться к сети и Интернету, нажмите или коснитесь «Разрешить доступ». Если вы хотите заблокировать доступ, нажмите «Отмена».

Если вы используете Windows с учётной записью пользователя, который не является администратором, вы не увидите таких запросов. Все программы и приложения фильтруются в соответствии с правилами, существующими в брандмауэре Windows. Если приложение не соответствует этому правилу, оно автоматически блокируется без отображения каких-либо запросов. Брандмауэр Windows включён по умолчанию в современных версиях Windows, таких как Windows 10, Windows 7 и Windows 8.1, и он работает в фоновом режиме в качестве службы. Он только предлагает пользователям, когда им нужно принять решение. Вам не придётся открывать его, если вы не хотите увидеть его статус или настроить его работу.

Что не делает брандмауэр Windows

Брандмауэр Windows не может защитить вас от любых злонамеренных атак. Это инструмент, который всегда следует использовать в сочетании с хорошей антивирусной программой, поскольку он действует как барьер между вашим компьютером и внешним миром. Он не может защитить ваш компьютер с Windows от вредоносных программ, которые уже присутствуют на нем. Если случится так, что ваш компьютер заражён шпионским или вымогательским ПО, то брандмауэр Windows не сможет остановить обмен данными между вредоносным кодом и удалёнными хакерами. Для этой задачи вам понадобится сторонний инструмент.

Вы можете включить или выключить брандмауэр Windows, только если вы являетесь администратором. Ваш параметр применяется ко всем учётным записям пользователей, которые существуют на вашем устройстве Windows. Кроме того, если вы решите отключить брандмауэр Windows, убедитесь, что у вас установлена надёжная альтернатива, например, сторонний брандмауэр или антивирус. Основы брандмауэра Windows и его работы не так сложны. Однако, если вы хотите испачкать руки и настроить более продвинутые правила, которые определяют, как это работает, вам нужно немного научиться, прежде чем делать это.

Если вы на 100% уверены, что конфигурация внутренней сети работает должным образом, но ошибка не устранена, необходимо отключить сторонний брандмауэр. Большинство современных антивирусных ПО оснащены сторонними брандмауэрами. Этот дополнительный защитный слой более чем приветствуется, но он не может гарантировать, что он не будет мешать вашей внутренней сети. Процедура отключения антивирусного программного обеспечения зависит от марки антивирусного приложения. Чтобы отключить брандмауэр Защитника Windows, выполните следующие действия:

  1. Нажмите Win+R, чтобы открыть окно «Выполнить» и войти в панель управления. Нажмите Enter, чтобы открыть окно панели управления.
  2. В списке параметров щёлкните и откройте брандмауэр Защитника Windows.
  3. В списке слева нажмите Включить или отключить брандмауэр Защитника Windows.

Другие способы

Для начаола нужно проверить правильность настройки вашего девайса. Для этого необходимо выполнить следующие шаги:

  1. Выполните щелчок правой кнопкой мыши на желаемом диске, к которому вы хотите получить доступ, и выберите «Свойства».
  2. Перейдите на вкладку «Общий доступ». Проверьте, отображается ли в сетевом пути Not Shared. Продвигаясь вперёд, выберите опцию «Расширенный доступ».
  3. В следующем окне «Расширенный доступ» установите флажок «Предоставить общий доступ к этой папке». В разделе «Настройки» подтвердите, что вы ввели правильное имя диска. В нижней части окна расширенного общего доступа выберите «Применить», а затем «ОК», чтобы сохранить настройки.
  4. Выйдя из предыдущего окна, нажмите сочетание клавиш Windows+R, чтобы открыть диалоговое окно «Выполнить».
  5. В текстовом поле введите имя папки и нажмите Enter.

Проверьте доступ к папке.

IP-адрес целевого компьютера

Выполните приведённый ниже обходной путь, если не удаётся устранить ошибку 0x80070035 предыдущим методом.

  1. Нажмите клавишу с логотипом Windows на клавиатуре и введите cmd. Щёлкните правой кнопкой мыши на командной строке, показанной под «Лучшее совпадение», и выберите «Запуск от имени администратора».
  2. Когда появится запрос на подтверждение запуска, выберите Да.
  3. В окне командной строки введите следующую команду и нажмите Enter:

ipconfig / all

  1. Найдите IPv4-адрес. For example:

192.168.43.193

  1. Снова нажмите сочетания клавиш Windows+R и откройте диалоговое окно «Выполнить».
  2. В поле поиска введите следующий текст и нажмите Enter:

\\ 192.168.43.193 \ имя желаемого диска, к которому вы хотите получить доступ.

Теперь диск должен открыться правильно.

Как видите, способов исправить ошибку 0x80070035 «Не найден сетевой путь» довольно много, и здесь вы наверняка найдёте решение, которое поможет вам избавиться от проблемы. Если вы уже сталкивались с такой ошибкой, поделитесь с нашими читателями в комментариях под этой статьёй.