Proper charging of a new smartphone battery

The scourge of any modern phones or tablets - batteries. Their charge is barely enough for a day, which worries many owners of devices. But often we ourselves ruin the battery on the phone just by starting to use it. Partly because we do not know how to properly charge a new battery of a smartphone or other gadget. This is easy to do, but not everyone is aware of or neglects these rules.

We all vaguely heard that there is some special way of charging for the first time in order to “shake” the battery. But all this in different ways. First you need to figure out what, in general, the types of batteries used in gadgets.

Often when buying a new smartphone, the question arises: how to charge the battery?

Types of battery

Nickel

Today it is the last century especially with respect to telephones. And the cause is several reasons. First, resource intensity. It is lower than that of modern analogues. And secondly, it is further reduced due to the fact that these elements have a so-called memory effect. It is enough several times not to charge the new battery to the end, and after that the capacity will start to decrease.

Lithium

Almost everyone came across the name “Li-ion”. This type of battery is on your laptops, mobile phones, tablets. Possess the highest energy capacity in comparison with nickel, are used practically in all modern devices. The memory effect on lithium energy cells is practically not shown. Today it is the perfect battery for your phone.

Most often, modern gadgets are equipped with lithium-ion batteries.

Buildup

Acceleration or buildup is a special way to properly charge the battery on a smartphone. Swinging the battery you need to get around this very memory effect.

“But why then do it if lithium batteries are deprived of such a disease?” - you ask. Then, that charging a new phone battery still costs in another way, because it will help increase the capacity used even on modern batteries. And also to increase the service life. You do not want to change the battery on your mobile in a year?

The same can be said about calibration. You need to know not only how to disperse the battery, but also how to calibrate. It allows the device to access the entire amount of energy. In this way, you will be able to maximize the use of the battery of your device.

The process of "acceleration"

So, how to swing a smartphone battery? This is done when buying a new battery, and when buying a new device.

  1. Sit the battery to zero percent from the moment they started using it.
  2. We charge to full 100%. It is also recommended to look at the instructions for charging the device and keep the device connected to the network for the same amount, adding a couple more hours.
  3. Make it 3-4 times.

Here, in fact, the whole process, which is designed to "shake" the battery. After that, experts do not advise each time to discharge it to zero and keep on the wire to hundreds. It is enough to allow a balance of 15–20% to start charging and finish it when the mobile phone shows 80–90%.

Calibration

The process is less significant, but the masters also advise to conduct it. Calibration is sufficient every one to two months. Immediately it is worth warning: owners of devices with built-in batteries are spared from such a duty.

  1. Before charging, we plant the phone completely, so that it disconnects itself.

    Put the battery to zero before starting calibration

  2. We connect to the network, but in the off state.
  3. Remove the charged battery, wait a couple of minutes, then insert and re-charge up to 100%. In this case, we do not include the gadget.
  4. We do this several times. Until then, immediately after the battery is replaced, the phone will not show 100%.

Thus, we “calibrate” the battery. That is, we give the mobile phone the opportunity to use all its energy intensity.

Now you know how to properly charge a new smartphone battery. This will increase the life of the battery. And also will reveal the maximum energy intensity.