In this article we will deal with the configuration of the router for Bashinformsvyaz. There are nuances, Bashinformsvyaz is the name of the provider, not the name of the router. A router can be absolutely anything, even initially not suitable, but reflash. We will consider setting on one of the most common brands - TP-Link.
TP-LINK router
Bashtel uses a PPPoE connection — this is a high-speed connection; when concluding a contract, in this case, a login and password are issued, which we will use when setting up Wi-Fi.
Preliminary manipulations
Open the box with the router, check the integrity of the body of the router, wires and antennas, if any. On the back of our device at least 4 holes: power, "input" and 2 "output". Insert the plug from the power supply into a suitable hole, the Internet cable into the hole marked “Wan”, two-way cable into either of the other two holes with one end and the other into our computer.
The assembly is completed, we connect the power supply unit to the network, the lights on the device body should flash.
Customization
Open any browser and in the address bar we write: 192.168.0.1 . We are offered to enter a login and password, in this case they are the same, we enter the word admin in both lines.
Enter login and password to enter the TP-Link administration panel
We hit the TP-Link administration panel, select “Quick Setup”
Choose "Quick Setup"
Click "Next" to continue. In the window that appears, indicate the country of residence, city, provider and type of connection.
Specify country and city, provider and connection type
The next window is the most important - we need to enter the same username and password that the provider has given us. Enter them and go on.
Specify the login and password that the provider gave us
On the next page we pay attention that wireless broadcasting is turned on, Wi-Fi will not work otherwise. SSID is the name of the access point, it will be visible to everyone. Be sure to set the wireless security and specify a password - with it you can connect to your Wi-Fi. Save or write down these data, without them you will not be able to use wireless Internet.
Completion of connection settings
This completes the setup, after clicking the “Finish” button, the router will reboot and the Wi-Fi access point is ready. Without unnecessary manipulations, you already have access to the Internet, but as long as the cable is connected to your computer or laptop. To use Wi-Fi, you need to pull the wire out of your machine and select your access point from all possible (the SSID you specified is what you are looking for).
Conclusion
We reviewed the connection and configuration of the Internet at Bashinformsvyaz on the example of the TP-Link router. Please note that not all stationary computers have a Wi-Fi module, so, most likely, you will have to connect via cable or buy a module in order to use wireless Internet. If you have a laptop - in 99 cases out of 100 you will have no problems with Wi-Fi.