It is difficult to come to terms with the forced position when the smartphone suddenly discharges, and there is not a single opportunity to charge the battery.

Being cut off from the whole world, it is terribly difficult for a modern person to remain without a means of communication, so it’s not surprising that the owners of modern gadgets stock up on a trip on long trips with additional charging devices that ensure the correct operation of the devices.

However, not only a discharged battery can bring unpleasant surprises. The smartphone operating system competes with this, often accompanied by various failures, as a result of which even a charged device refuses to perform certain actions.

Many users are not satisfied with the standard firmware ZTE and they decide to flash their smartphone

Faced with such a problem, most users decide to flash their ZTE smartphone in order to safely get rid of their problems.

Why there is a need for firmware

There are several circumstances that force owners of modern devices to invade the “inner world” of their electronic friend.

Armed with information about what causes are capable of provoking system failures, it is much easier for smartphone owners to warn the gadget against the sad consequences or to recognize them in time and take actions that eliminate all the problems that have got in the way.

Causes of operational failure

It may happen that your favorite ZTE smartphone has stopped working. The reason may be in its mechanical damage, when it was treated carelessly, often dropped on the floor, moisture got on it. It is also quite possible to fail with the components of the device.

Unfortunately, to solve the problem of mechanical damage to the smartphone at home is impossible, so it’s properly taken to a service center. Skilled craftsmen will conduct effective "intensive care" activities and breathe new "life" into the gadget.

Another reason for the fact that at some stage the smartphone starts to reboot, turn off by itself, is the failure of the operating system. This problem can be solved at home, but only with appropriate training.

It is very important to prepare, since the ZTE v815w firmware itself can be unsuccessful if it was installed accompanied by gross errors.

So, they are interested in how to flash ZTE v815w those who noticed the incorrect work of the gadget, who decided to optimize the system by installing an updated version of the firmware, about which positive responses were widely spread.

Flashing process

Many owners of modern gadgets will be able to flash the ZTE smartphone if they first receive a “portion” of useful information that allows you to thoroughly figure out how to flash the ZTE v815w.

In this case, you can take the risk and do everything yourself, saving financial resources, as well as increasing your level of knowledge of modern devices.

Firmware algorithm

Programmers periodically give users a variety of useful products that allow many operations to be carried out not only quickly but also easily.

One of these software products is the CWM application, which focuses on the process of installing the operating system for ZTE smartphones.

Download and install this application is recommended in advance. Also, gather information about your smartphone, since it is desirable to use the device in the performance of Gen 2 for firmware.

Unfortunately, not all smartphones are accompanied by such a performance, you can also find options where there is Gen 1. In this case, you will have to take one additional step.

On specialized forums, it is easy to find the CyanogenMod application, which can act as a successful assistant when translating the Gen 1 version into Gen 2.

First, turn off the phone, then hold down the two “-” and “on” keys simultaneously, after which “FTM” should appear on the screen. Only after that you need to connect the smartphone to the PC.

It remains to find the download_nochecksGen2 boot file with the exe extension, run it, wait for the process to complete and make sure that the smartphone now has the desired Gen 2 performance.

Smartphone firmware starts with formatting a flash card. In some cases, you have to run the formatting process more than once. Unfortunately, sometimes there is no other option how to replace the flash card, so you have to resort to such a replacement. This applies in most cases, cheap and too low quality flash cards.

Now, on the prepared flash card, safely copy the previously downloaded firmware. Do not forget to make the computer to successfully determine the smartphone in the CWM application.

It's so easy, just find the “Mount USB storage” parameter in the main menu, click on it, then copy the firmware file, then click on another “Unmount” parameter.

The next step involves the immediate process, during which the firmware is installed on the smartphone.

In Recovery, find the “Install zip from sdcard” parameter, click on it and follow all the recommendations that will be displayed on the screen. After the process is complete, you need to restart the smartphone. This will help you parameter "Reboot system now".

Now, after launching the smartphone, you can enjoy the work of your own smartphone, on which the new firmware is installed. This method of installing new firmware versions is only suitable for ZTE Blade smartphones.

So, to return the smartphone to work, with which you do not want to say goodbye and buy a new device, the owner himself can, if he really values ​​his device.

If the first attempt failed, the firmware was not installed correctly, which is reflected in the low efficiency of the device, you can repeat the process.

Only this time, it is necessary to show increased vigilance, as well as to download the firmware version from proven resources. It is not recommended to trust all sources that characterize their offer with attractive phrases.

Together with them, you can download and additional "gifts" in the form of malicious software that could seriously harm the smartphone.