Edius Professional Audio Editing

In the world of professional video editing software, several primary names dominate, and EDIUS Pro is a simple alternative to industry leaders. This is because it includes all the competing tools with a simplified interface available to most video editors who have at least some understanding of the basics of editing.

Description

EDIUS system requirements, interface, and workflows are almost as good as other professional non-linear editors. It is available to new users, providing the tools that experienced veterans need. Basic knowledge is required, but not so much as to work with some of the professional multimedia editing and editing software. Consider how to adjust the audio volume, add a description, etc. in more detail.

Opportunities

You can add background music and sound effects, partially adjust the sound volume and perform other editing. In addition to audio clips placed on tracks A, you can partially adjust the volume of clips placed on tracks VA.

Adjusting the volume and panning the clip

To improve the sound using Edius, two marks are placed on the timeline; Marks on the orange line are used to adjust the volume, and the pan (blue line) to change the stereo L / R balance. Such marks can also be added to adjust the shape of the rubber tape.

  1. Click the audio extension button on the track panel. The track will “increase”, a bounding line will appear in the shape of a wave. For stereo sound, the waveform is displayed on each channel.

Alternative:

  • Advanced sound display: [Alt] + [S]
  1. Press [Volume / Pan]. It switches the volume, pan and lock.
  2. Check the box where you want to apply the changes. A point is added which is used to adjust the volume or pan.

Alternative:

  • Right-click the point where you want to add a point, then click [Add / Remove].

Tick ​​marks

You can adjust the volume and pan of the clip. You can also adjust the volume and pan along the time axis by adjusting the shape of the corresponding bounding track.

Adjustment using the mark:

  1. Open the bulk or round bounding tape and add a mark.
  2. Drag point vertically or horizontally:
  • Fine adjustments can be made by dragging the point while holding down the [Ctrl] key on the keyboard.
  • You can adjust the entire limit line by dragging the point while pressing the [Alt] key on the keyboard.

To increase the volume:

  • Drag point up to increase volume, and down to decrease.

For pan points:

  • Drag point up or down to adjust L / R stereo balance. Drag the point up to move the sound to the left side and down to move it to the right side.

Adjustment between 2 points:

  1. Open the bulk or round bounding tape and add a mark.
  2. Drag the mark between 2 points up or down while holding down the [Shift] key on the keyboard:
  • The shape of the pointer changes, and you can move the mark up or down between two points.
  • Hold the [Shift] + [Ctrl] keys on the keyboard to fine tune while dragging.

In addition, dragging with the [Alt] button on the keyboard, you can automatically add a new point between the other two and move it parallel to them. You can set how many frames within 2 points at both ends to place automatically. To do this, select Source in User Settings / Duration.

Adjustment of the entire tape:

  1. Open the bulk or round bounding tape.
  2. Drag the point up or down while holding down the [Shift] + [Alt] keys on the keyboard:
  • The pointer shape will change, and the entire track can be adjusted.
  • All other points will move proportionally depending on the position of the selected mark.
  • Fine adjustments can be made by holding down the [Ctrl] key on the keyboard.

Adjustment by entering values

You can customize the marks by entering values:

  • Open the bulk or round bounding tape.
  • Right-click on the tape point and select the setting method:
    1. [Go] - adjust the volume or time interval of the selected point.
    2. [Move two alignment points] - move the segment that is between the selected and the next to the right of the selected point, horizontally and proportionally, depending on the value, from which the selected point changes.
    3. [Add points and move] - add 2 new points between the selected and next right mark, move the segment between 2 added points horizontally and proportionally in accordance with the size of the segment in which these 2 added points change.
    4. [Move all] - proportionally move other points in accordance with the size of the segment of the selected point.
    5. [Move everything to scale] –Adjust the volume in proportion to all points; or press ([Shift] + [Alt] + [Y]) on your keyboard.
    6. The value input dialog box opens.
  • Enter values.
  • Click [OK].

Setting the balance in the center

To make L / R the same, you need to adjust the sound level:

  1. Open the panel marked.
  2. Right-click the mark and select [Center].
  • All points of the tape will be erased, and the selected will remain in the center.
  • Pressing [L] or [R] will remove all tape points and adjust the mark between L or R.

Initialize / remove tape elevations

You can delete or initialize a specific mark. Delete all tape points in the project:

  1. Open the bulk or round bounding tape.
  2. Right-click the checkmark and select [Delete All]. All points will be deleted.

Alternative:

  • Right-click the audio clip and select [Delete details] / [Audio track] / [Volume] or [Pan];
  • Select a clip, click [Edit] in the menu bar, then [Delete details] / [Audio track] / [Volume] or [Pan];
  • Removing the bulk tape: [Shift] + [Alt] + [H];
  • Remove round ribbon: [Ctrl] + [Alt] + [H].

The following actions edit only the tape position, leaving marks in place:

  • Right-click the ribbon and select [Initialize All].
  • Rubber Band Initialization: [Shift] + [Ctrl] + [U] (Perform the procedure after selecting the desired ribbon.)

Delete selected tape point:

  1. Open the bulk or round bounding tape.
  2. Right-click the ribbon point and select [Add / Delete].

Alternative:

  • Select a tape point and press [Del] on the keyboard.

Principle of operation

Installing and configuring Edius does not take much time. Just run the wizard and follow the instructions on the screen.

Setup using AudioMixer

After installing Edius, you can edit the volume and pan of the audio or video on the timeline, as well as the video in the preview window during playback, using the audio mixer (AudioMixer).

Volume adjustment:

  1. Click [ToggleAudioMixerDisplay] in the timeline. The [AudioMixer] dialog box appears. The value (maximum or current) that was used in the [AudioMixer] dialog box for the last time before closing is displayed.

Alternative:

  • Click [View] in the menu bar and select [AudioMixer].
  1. Press [Settings], then [VU meter]: Open the VU meter to set up playback of any frequencies.
  2. Select the line for which you want to adjust the volume, and add an element.
    • To adjust the volume of the entire track, select [Master].
    • To adjust the volume on individual tracks, select the operation setting for each track and check what needs to be adjusted ([TrackNo] or [Clip]).
    • To configure using the learning function, select the learning mode from [Latch], [Touch] and [Write].
  3. Move the timeline cursor to the position to start playback, and click [Play] in the [AudioMixer] dialog box.
  4. Drag the fader to adjust the volume.

Alternative:

  • Volume control (in 1 dB increments): [↑] / [↓];
  • Volume adjustment (in 0.1 dB steps): [Shift] + [↑] / [Shift] + [↓];
  • An additional fader controller can be used to control the fader.

Dialog box [AudioMixer]

  1. Pan control.
  2. [Mute] / [Solo] - turn on or off the sound.
  3. [Gang] - connect to the fader.
  4. Level Indicator - Displays a level indicator.
  5. [Settings]:
    • [Peak Meter] —Visual changes in the audio signal. Gradation is displayed as a scale.
    • [VU meter] - Displays the average volume of the audio signal. The beep can be customized for human hearing. Gradation is displayed as an audio reference scale.
    • [Save operation setting] - even if playback is stopped during training, the training mode (operation setting) is saved. Closing the [Audio Mixer] dialog box switches [Save Job Settings] to OFF.
  6. Setting up work - switch the learning mode to adjust the volume (setting up the operation) or the volume / pan theme.

[Latch], [Touch] or [Write] sets the learning mode. In the training mode, the Pan setting is not available. The basic setting of the operation can only be [Master] or [Off].

  • [Master] - adjust the volume of the entire track.
  • [Track] - update individual sections using pan and fader control. Training not available.
  • [Clip] - the clip where the cursor is located on the timeline is updated using the pan and fader functions.

If the mark is already set, the pan is controlled by the “Move All” parameter, and the volume is “Move All To Scale”.

  • [Off] - Locks the pan and fader knob.
  • [Latch] –activate the learning mode from the beginning to the end of the selected sound segment.
  • [Touch] - highlight the desired range. Release the mouse button to automatically return the fader to its original volume.
  • [Write] - enable recording throughout the entire playback.

Unlike [Latch] or [Touch], all previously used volume values ​​are overwritten, regardless of fader drag.

  1. Excess level indicator - lights up when the level is exceeded. Click to turn it off.
  2. Fader - drag up and down to adjust the volume.
  3. [Play] - playback of the timeline from the point of the cursor.

Pan adjustment:

  1. Click [ToggleAudioMixerDisplay] in the timeline. The [AudioMixer] dialog box appears.

Alternative:

  • Click [View] in the menu bar and select [AudioMixer].
  1. Select a pan setting, then [Track] or [Clip]. Click [Track] to adjust the pan for each track, and click [Clip] to adjust the pan for each clip at the cursor position on the timeline.
  2. Hover the mouse over the pan control and drag it.

Alternative:

  • Panorama adjustment (in 1 dB steps): [←] / [→];
  • Pan adjustment (0.1 dB increments): [Shift] + [←] / [Shift] + [→];
  • If you right-click the [AudioMixer] dialog box of a particular track and select [Reset], the volume and pan settings, connection settings, solo mute settings and operation mode will be reset. To reset all tracks, right-click the [AudioMixer] dialog box and select [ResetAll].
  • Performing [Reset] or [ResetAll] does not affect the volume or pan settings for other tracks.
  • The size of the [AudioMixer] dialog box can be adjusted. Move the cursor to the left or right edge of the [AudioMixer] dialog box and, when the shape of the cursor changes, drag to adjust its size. After adjusting the size, the [AudioMixer] dialog box will be displayed with the same size after re-opening.

Adjustment while maintaining the difference in volume

Controllers for setting the fader and pan can be connected between multiple tracks. Three communication patterns can be set: [Gang1] (yellow), [Gang2] (red) and [Gang3] (blue).

  1. Click [Gang] on each track to simultaneously adjust the [AudioMixer] dialog box. The fader color changes depending on the color of each [Gang].
  2. Configure one fader (controller) from the list of linked faders (controllers).
  • Tracks of the same color are adjusted, keeping the difference in volume and volume.
  • Before using the fader (controller) of a number of linked tracks, set [Operation] for the tracks you want to link to, except for [Off].

Play / mute only a specific track

Audio playback can be limited to a specific track. Certain tracks can also be disabled.

  1. In the [AudioMixer] dialog box, click [Mute] or [Solo] for the track (s) you want to play.
  • Pressing [Mute] mutes the selected tracks. Click [Solo] to play audio from the selected track only.

Normalizing the sound level of multiple clips

You can set a basic sound level for several projects and adjust them at the same time. When normalization is applied to multiple clips, the gain value is adjusted to adjust each of them to the appropriate sound level.

During normalization, you can specify the time interval of the first mark. You can change this setting in [User Settings] / [Automatic Correction] / [Source].

  1. Select clips for normalization.
  2. Click [Clip] in the menu bar, then [Normalize]. The [Normalize] dialog box appears.

Alternative:

  • Right-click the clip and select [Normalize].
  1. Enter the sound level to be used as a template, and click [OK].
  • The initial adjustment of the volume level in the project is noted in [Basic Sound Level].
  • When normalization is applied, the orange line will be displayed below the audio portion of the clip.

Check and change settings in projects

The value of the gain settings can be checked and changed.

  1. Select a clip for which the gain value will be confirmed or changed.
  2. Click [Clip] in the menu bar, then [Properties]. The [Properties] dialog box appears.

Alternative:

  • Right-click the clip and select [Properties].
  1. Click the [Audio Information] tab. The setting value is displayed next to [Gain].
  2. Enter the gain value and press [OK]. You can also confirm the normalized gain value in [Information].

For 1ch audio channel and 2ch video clip, match channel V and channel A1 with track 1VA, and channel A2 with track 1A. Change the gain of track 1VA by 5 dB and the gain of track 1A by 10 dB. Double-clicking displays the track 1VA clip on the player. Reinstall the clip on the player with the same display setting (matching channel V and channel A1 with track 1VA, and channel A2 with track 1A).

At this time, the gain value placed in track 1 VA will be 5 dB, but the change in the gain value of track 1 A will become 0 dB.

Partial volume adjustment

To hide noise, etc., edit the waveform.

  1. Click the audio extension button on the track panel.
  • The track will be expanded, and a sound wave will be displayed. The waveform of the stereo sound is displayed in each channel. With the help of a range of waveform and actually reproduced sound, noise and other parameters can be adjusted.
  • Waveform display can be changed in [User Settings] / [Timeline] / [Application].

Noise reduction (V-mute function)

To adjust the attenuation before and after the center point, adjust noise, etc., follow these steps:

  1. Select the track in which you want to place the V-attenuation marker.
  2. Move the cursor on the timeline to the position where the volume should be zero. Confirm the waveform display and adjust the position of the cursor on the timeline.
  3. Right-click the clip to which you want to apply the V-mute, and click [V-Mute]. The volume at the position of the time scale cursor will become zero, and four points will be added to the time scale with a time scale cursor in the center.

Alternative:

  • V-mute settings: [Shift] + [V];
  • After adjusting the V-mute, drag a point on the volume bar left and right to fine-tune the length of the decay of the sound.
  • The default duration for V-mute can be changed in [User Settings] / [Duration] / [Source].

Voice oversize

Voice-over is a feature for adding narration or sound effects when previewing a clip on a timeline. You can add audio (sound effect) during preview.

  1. Match the audio channel and set the entry point where you want to place the sound.
  2. Click [ToggleVoiceOverDisplay] in the timeline. The [VoiceOver] dialog box appears.

Alternative:

  • Click [Record] in the menu bar, then [Voice over].
  1. Select [Device Preset] from the list.

Pre-installation of the device must be done in advance. A preset cannot be selected if only one standard parameter setting is registered.

  1. Adjust the volume of the source data using the [Volume] slider so that it does not exceed 0 dB.
  2. Select [Track] from the [Output] list, and then:
    • [Bin] - add a sound clip only to the basket.
    • [Track] – добавьте аудиоклип как на дорожку A, указанную в шаге 1, так и в корзину.
  3. Введите имя файла и нажмите […], чтобы указать место сохранения.
  4. Нажмите [Start].

При начале обратного отсчёта в левом верхнем углу белый круг начнёт мигать, а затем изменит цвет на красный при начале записи. Если на редактируемой дорожке громкость аудио оставить по умолчанию, звук на ней будет отключён одновременно с началом аудиозаписи.

Время, прошедшее между нажатием [Старт] и началом записи, изменяется в зависимости от времени, установленного в [Системные настройки]/[Приложение].

  1. Нажмите [End].

Воспроизведение клипа и создание аудиоданных остановится, после чего появится диалоговое окно для подтверждения добавления созданного файла.

  1. Нажмите [Yes], чтобы добавить аудиоклип на временную шкалу и сохранить данные.

Белая линия с правой стороны индикатора уровня меняется на красную, когда громкость превышает 0 дБ. Щелчок мышкой вернёт значение громкости по умолчанию.

Advantages and disadvantages

Что касается нелинейных видеоредакторов, это приложение является таким же хорошим инструментом, как и профессиональные инструменты. Оно имеет мощные функции, расширенную временную шкалу, поддержку мультикамер, 64-битную обработку и все другие полезные возможности, которые делают профессиональное программное обеспечение для редактирования аудио подходящим для профессионалов.

Benefits:

  • приложение предлагает редактирования видео и аудио без рендеринга.

Disadvantages:

  • Для использования программного обеспечения пользователям Apple необходимо установить Bootcamp.

Что отличает EDIUS Pro от остальных конкурентов, так это то, что он исключает рендеринг из процесса редактирования. Это большое преимущество перед приложениями, которые требуют времени и вычислительной мощности для рендеринга материала, даже если это теперь происходит в фоновом режиме.

В последних обновлениях EDIUS добавил ускорение графического процессора, которое использует вычислительную мощность вашей видеокарты для более быстрого создания потоков.

EDIUS предлагает широкое разнообразие форматов файлов, в которые вы можете экспортировать созданный материал. Он может обрабатывать любые пропорции, кодеки и разрешения, которые вам нужны. Вы также можете создавать DVD или Blu-ray диски прямо из программы.

Индустрия программного обеспечения для редактирования аудио и видео быстро отходит от предоставления клиентам возможности приобретать программное обеспечение напрямую. Многие переключились на модель подписки, которая предполагает все обновления без необходимости покупать новую программу каждые несколько лет. Тем не менее, это также означает, что, если вам не хватает денег, вы можете потерять доступ к своим проектам. EDIUS делает лучшее предложение, обеспечивая одноразовую покупку и предоставляя бесплатные обновления в течение всего срока действия приобретаемой версии.

Analogs

Выбор профессионального программного обеспечения для редактирования мультимедиа сегодня настолько широк, что неопытному пользователю выбрать подходящее приложение будет очень сложно. Вот некоторые из самых популярных программных аналогов Edius.

Adobe Audition CC

Adobe Audition CC является частью Adobe Creation Cloud – лидера рынка, когда речь заходит о программном обеспечении премиум-класса, и его софт для редактирования аудио Adobe Audition CC не является исключением. Adobe Audition CC – это лучшая в мире программа для редактирования многодорожечных аудио-файлов, которая уже давно является стандартным инструментом профессионалов. Этот гибкий и многофункциональный продукт нельзя отнести к той же категории, что и другие любительские редакторы на рынке. Adobe Audition CC доступен только для пользователей Mac и Windows и поддерживает абсолютно все форматы музыкальных файлов.

Благодаря профессиональному интерфейсу музыкальных редакторов может потребоваться некоторое время, чтобы ознакомиться с инструментом и использовать его для редактирования звуковых дорожек. Если вы новичок в мире Adobe, наверстать упущенное вам помогут инструкции в интернете. Огромная мощь и замечательный набор инновационных концепций, таких как форма волны, многодорожечный и спектральный дисплей, делают Adobe Auditions CC лучшим звуковым редактором.

Цена: $20, 99/месяц

Cubase

Если вам нужно интуитивно понятное решение для редактирования звука профессионального уровня на вашем компьютере, Cubase будет одним из лучших выборов. Софт предлагает своим пользователям обширный набор встроенных инструментов и профессиональный интерфейс, который можно использовать на различных платформах. Многие профессионалы, в том числе продюсеры и авторы песен, предпочитают Cubase, потому что программа даёт возможность проявить творческий подход. Последняя версия Cubase сочетает в себе замечательное качество звука, интуитивно понятное управление и ассортимент высокоразвитых инструментов MIDI.

Пользовательский интерфейс организован настолько профессионально, насколько это возможно. Cubase позволяет создавать и микшировать музыку по своему усмотрению, а также предлагает поддержку большинства популярных аудиоформатов.

Цена: $59, 99

Sound Forge

Sound forge – это ещё один современный аудиоредактор, который позволяет записывать, редактировать и обрабатывать треки, используя правильный баланс профессионализма и простоты использования в интерфейсе. Это инструмент, созданный опытными звукоинженерами, может быть полезен для таких профессионалов, как музыканты, звукорежиссёры, композиторы и редакторы саундтреков. Он совместим со всеми аудиоформатами и поставляется с настраиваемым пользовательским интерфейсом.

При покупке платной версии вы получаете потрясающую поддержку эффекта VST3 и интеграцию с Spectra Layers Pro. Единственным недостатком этого инструмента является то, что он не поддерживает многодорожечное редактирование или сторонние плагины, как другие программы в этом списке.

Цена: $499, 00

Reaper

Reaper – это превосходное гибкое программное обеспечение для редактирования аудио с впечатляющими функциями, которое позволит вам легко настраивать и редактировать музыкальные треки. Быстрый и эффективный характер этого программного обеспечения означает, что вы можете установить и запустить его с сетевого или портативного диска.

Поддержка многоканального редактирования звука в Reaper делает его идеальным решением для редакторов аудио. Reaper поддерживает несколько сторонних подключаемых эффектов и виртуальных инструментов. За небольшую плату вы получаете полный доступ ко всем функциям премиум-класса.

Цена: $60

Logic Pro X

Logic Pro X – это фантастическое обновление и без того компактного и полнофункционального аудиоредактора. Инструмент от Apple способен быстро и профессионально выполнить поставленную задачу. Интерфейс Logic Pro X достаточно дружелюбен для начинающих. По умолчанию доступно 7000 бесплатных вложений Apple Loops, которые предлагают вам базовые возможности редактирования.

В последнем обновлении появились новые плагины для продвинутой реверберации, креативных эффектов и винтажных эквалайзеров. В целом, Logic X Pro – отличное программное обеспечение для профессионалов и музыкантов. Единственным недостатком Logic ProX является то, что он доступен только на Mac.

Цена: $199, 99

AVS Audio Editor

AVS Audio Editor – это не обычный музыкальный редактор, а полноценное программное обеспечение для настройки аудио с продвинутыми инструментами. Редактор имеет широкий спектр функций и возможностей.

Это по-настоящему полезный инструмент с более чем 20 встроенными эффектами и фильтрами. На первый взгляд хорошо продуманный интерфейс этого программного обеспечения может показаться немного сложным. Редактировать и сохранять аудио можно во всех распространённых форматах, включая WMA, OGG и ALAC.

Цена: $69

EDIUS Pro является надежной альтернативой существующим приложениям для редактирования видео и аудио. Он может делать практически всё, что могут стандартные отраслевые программы. Тем не менее нет ничего, что делает его особенно превосходящим их.