Ways to Fix Windows Error 0xc000000f

When working actively with a computer, the speed of the OS installed on it deteriorates over time, various malfunctions and problems may appear. One of the most common errors is the incorrect operation of the Boot \ BCD file and the output of the code 0xc000000f. What does it mean, and how to deal with it, let's look in more detail!

The most common error 0xc000000f arises due to hardware hardware failures

The reasons

There are a number of factors that cause the error 0xc000000f. Users encounter this code most often during the installation of the system from the disk, as well as with the standard start of Windows. So, the following causes of failure occur:

  • disk with installation files is damaged;
  • Driver controllers do not work correctly;
  • BIOS reset boot parameters;
  • bsd file is deleted or damaged;
  • Winchester does not work;
  • There are errors in the system disk.

Obviously, having understood the cause, you can understand how to eliminate the defect and return the equipment to its working capacity. If you are not a system administrator, then it is very difficult to recognize what caused the state 0xc000000f to appear. In this case, it is recommended to successively test each of the methods proposed below.

BIOS setup

If the hard drive is working properly, it is important to check the system BIOS. Entering the parameters of this system is not difficult - hold down the Del, F1 or F2 key in the first seconds after starting the device. The menu here for different versions of Windows is the same, we are interested in the “Boot” item. To prevent the error 0xc000000f from appearing again, click the “Hard Disk Driver” in the list that appears and make sure that the 1st Drive has a hard disk (SATA). To control, you can use the arrows on the keyboard. After doing this, save the new configuration (F10), and reboot the PC.

Using an installation flash drive or disk

You can get rid of the defect in another way, for this purpose you use a bootable optical disk or flash drive. The step by step instruction looks like this:

  • go to the BIOS and set the Device Priority at the Boot point so that the system starts from the USB flash drive or optical disk, it all depends on what you store the installation files, now restart the PC;
  • if everything is done correctly, the installation wizard will start, in which you should click on “System Restore”;

  • after verification, it will be possible to correct the detected defects in an automatic manner;
  • if the repair message did not appear, then select your OS in the recovery options yourself, then click on "Startup Repair".

Error 0xc000000f then usually disappears. If this does not happen, go back to the settings and select the field "Command line". Now it remains only to enter the command chkdsk C: / f and wait for the result. As soon as the system performs the check, the DOS line can be closed and reboot.

No effect even after that? Then follow the same steps, and in cmd enter Bootrec.exe. To resume the disk structure, 4 commands are used. All of them are very easily sent for execution, you only need to drive into the command line each of them in turn, in the order indicated on the screen. Each team performs its function: recording the main MBR of the system partition, searching for the necessary information on the disks, creating the boot sector.

A command such as bootsect / NT60 SYS will help to resume the bcd file. After you enter it, the computer will offer to start Windows automatically.

Use of utilities

There are special programs, using which you can get rid of failures and errors. One of them is Easy Recovery. The application is distributed free of charge through the developer’s website, after downloading it should be written to the drive, and then run, setting the priority in the BIOS.

The utility has a simple and intuitive interface, it will be possible to remove the system error if you follow the instructions described inside. The easiest way to click on Automated Repair, and then Continue. Do not forget to note the disk on which your OS is installed. Interestingly, this program is very popular among both ordinary users and system administrators, and programmers.

The method is effective for all versions of Windows, so you can safely use it to resume the work of version 10, and to solve problems with XP. In addition to this assistant, there are many others on the Internet: Error Fix, MBRFix, Paragon HDM, etc.

Results

We hope that the methods presented here will help remove error 0xc000000f from your computer and return it to work. Do not rush to format the entire system or change the hard drive, perhaps everything is not so critical. We wish you success!