The Intercross ICXDSL 5633 device is an inexpensive but reliable Russian-made ADSL modem. The modem is the first step of domestic developers in the creation of network devices. Let us consider in more detail the features of his work.
The device can operate in different modes.
Specifications:
- SNMP, Telnet support;
- Ethernet interface;
- built-in router and switch;
- there is a DHCP-server, NAT, static routing, Firewall.
The device is configured to work with the operator Rostelecom.
Bridge Setup
The ICXDSL 5633 Intercross modem can be configured to operate in Bridge or PPPoE mode. All manipulations are performed via the interface: enter 192.168.1.1 in the browser, then fill in the login / pass fields (the default settings for both lines are admin).
Having done everything right, you will get to the main menu, Internet settings change in the WAN item of the Network section.
Experts recommend initially removing the factory settings (Delete key at the bottom of the screen). Now enter the following parameters:
- Chanel Mode - 1483 Bridge;
- VCI - 33;
- VPI - 0;
- press the Add key;
- Click the Save button at the bottom of the screen;
In order for the settings to take effect, it is important to reboot the device (the modem will reboot if you click Reboot in the Admin tab).
PPPoE setting
To set up Intercross ICXDSL 5633 in router mode, we recommend using the quick setup wizard. To get into it, you must select the Wizard tab in the interface.
The process consists of several steps. The system, at each of them, will prompt what exactly needs to be done.
First, it is recommended to change the password to the interface settings. Type a reliable phrase in the New password, and also repeat it in the next line. By doing this, you can press the Next key.
The second item is filled at will. Here you need to enter the belt in which you are located. Select the desired option or just go to the next step.
Stage 3 is considered the most responsible. You have to set important parameters for network access:
- Encapsulation - LLC / SNAP;
- VCI - 33;
- Default Route - Enable;
- type - PPPoE;
- VPI - 0;
- In the PPP Settings field, you must enter the login / pass issued by the provider (this data is usually recorded in the contract);
- DNS Settings - Obtain DNS automatically.
Everything is almost done. The last step is needed to verify all entered data. After verifying the correctness, click on Finish and enjoy the World Wide Web. If the network does not appear immediately, try to save the new settings and reboot the equipment (Save current configuration in the Admin tab).
Firmware
You can update the firmware in the Upgrade Firmware interface section in the Admin tab. The procedure is as follows:
- Download the file with the updated software from the manufacturer;
- clicking "Browse", write the path to the downloaded file;
- Click the Upload button to start the update.
To complete the installation of the firmware requires some time. You can not interrupt the process or turn off the router. Usually Intercross ICXDSL 5633 is stitched in two to three minutes.