Before us is a well-balanced, inexpensive router that has proven itself well among users. The TP-LINK TL-WR841ND device is considered one of the most famous in the TP-LINK line. It will help to organize a Wi-Fi-point with support for 802.11n or to connect to the network of any provider. How to configure this router to work effectively? Let's try to figure it out.
The router is designed to build networks of any complexity.
Specifications:
- Support PPPoE, L2TP;
- 2, 4 GHz;
- CCA-technology is responsible for the absence of channel conflicts;
- the router is equipped with two antennas;
- 300 Mbps;
- information transfer speeds up technology 2 * 2 MIMO;
- four LAN ports.
The router is well suited for networking in small offices and private homes. The stated characteristics make it possible to get a reliable signal. If we consider the shortcomings, then we note that sometimes users complain of a rare hang-up and problems with the wireless network. You can get rid of such problems with TP-LINK TL-WR841ND by updating the firmware.
Connection
The TP-LINK TL-WR841ND router is connected to the network and connected by wires: a wire is used to connect the router to a PC (it is inserted into the LAN connector), and the provider's cable is connected to it (plug it into the WAN jack).
Customization
Initially, you should go into the shell of the device, the interface "lies" along the path "192.168.1.1". After entering these parameters, a new window will appear, where the system will ask you to fill in the login / pass fields. If the router is new, enter admin / admin. The second way is to return to the initial settings by holding the reset key for a couple of seconds.
There are two methods of adjustment - quick and manual. With a quick setup, everything is done in a matter of minutes, but there is a risk of missing an important detail, so we will consider a more detailed version.
PPPoE compound
PPPoE is needed to work with Dom.ru and the Rostelecom operator. Go to the "WAN" section of the "Network" and fill in the fields as follows:
- Type - РРРоЕ / РРРоЕ Russia;
- disable Secondary Connection;
- login / pass - enter data from the contract;
- confirm password - confirm the keyword;
- connection mode - connect automatically.
Do not change other fields for TP-LINK TL-WR841ND, apply the new configuration of the router ("Save").
VPN L2TP connection
The following settings will be useful to anyone using Beeline. So, in the WAN, try setting the following router parameters:
- Name - tp.internet.beeline.ru;
- login / pass - enter the information provided in the contract;
- WAN type - L2TP;
- Connection mode - set the flag next to "Connect automatically";
- Select the Dynamic IP option.
Next, check the data for correctness and save the changes.
Wi-Fi setup
The characteristics of this router allow you to configure it as a Wi-Fi point. For this, it is important to go to the “Wireless Settings” item in the “Wireless” section. Now think up a name for the new point, select the region - Russia and set the Auto parameter opposite the “Channel” field.
At the next stage, it is important to set the flags in front of the items “Activate SSID Broadcast” and “Activate Router Radio”. Another necessary condition is to specify the parameter 11 bgn mixed opposite the Mode field.
The password for the point is configured in the “Wireless security” item. Here the fields are filled with:
- Type of specification - WPA / WPA2-Personal;
- PSK password - create a strong keyword;
- Encryption / Version - Automatic.
It is better to write the password somewhere, then save the new configuration.
Change factory password
If you purchased a new device, you will need to enter admin / admin to enter the interface. The problem is that any of the users connected to the router via Wi-Fi will be able to do the same. If you do not want to open the settings to anyone, we recommend changing the standard authorization data. This is done in the "System Tools" section. Here you need to specify the old password and login, then come up with and enter new parameters. By applying the changes, you can get to the interface only after entering new login / pass.
