How to set up and flash MegaFon MR100 3 router

Megafon Company offers its users a 3G / 4G MR100 3 router for distributing Internet and surfing the net. The device is a complete analogue of the models Altel 4G E5372 and Huawei E5372. When connected to a PC, the device can be used as a normal modem.

Router in its parameters is not much different from its predecessors

The router is able to distribute the Internet to ten users at the same time, while its radius of action is 10 m. A tablet, a mobile gadget, a laptop or a regular computer can act as a client. Let us consider in more detail the characteristics and features of setting up the Megaphone MR100 3.

Specifications:

  • 1780 mAh battery;
  • support distribution to 10 users;
  • the ability to use microSD cards up to 32 GB;
  • TFT-LCD display;
  • interfaces for SIM-card, microDS, micro USB, Wi-Fi;
  • 130 grams;
  • 100 Mbps for LTE 4G.

Interestingly, the information will be transmitted and received the slowest using EDGE / GPRS technology (not higher than 236.8 Kbps). As for the main communication capabilities, these are: GSM, TDD, WCDMA, EDGE, FDD, GPRS.

The MR100 3 device is equipped with special connectors for antennas. The developers have thought of this option in order to be able to amplify the signal with a weak reception.

An interesting feature is also the fact that the router can be used as a charger for Bluetooth headsets, mp3 players, as well as smartphones.

With periodic surfing, the router is able to work for about five hours. These indicators will be enough to create an Internet zone at a party, meeting with friends or at any event.

Complete set: the accumulator, the device, the instruction and a cable for synchronization and charging.

Users like the look of this model. The router fully satisfies the requirements of mobility, is placed in a pocket of a shirt or trousers. Also note that the Megaphone MR100 3 router will not become a heavy burden for a handbag.

Connection

Before starting the setup, it is important to connect the SIM card. The slot for it is located under the back cover. So, remove the cover, remove the battery and place your card, as well as microSD (in a different slot). What is the need for a memory card on such a modem? Users who access the network through Megaphone MR100 3 will be able to store images, music, videos and documents on such a card.

If the device is not new, return to the original settings by holding the Reset key for a couple of seconds.

All manipulations for setting up the MR100 3 are done via the web interface. You can enter it by typing the address indicated on the device itself. Most often the address is prescribed under the battery on a sticker.

Interface and configuration

Here you will see several tabs with which you can customize the router to fit your needs. On the main, for example, you can see the status of the WLAN, as well as the current connection.

The “Statistics” tab lists the traffic limit, the amount of data received, information about customers who have connected to the wireless network.

If you need to send an SMS message via the interface, go to the SMS item. The configuration of the SMS center is also configured here.

The balance of money on the account is checked in the item "Balance". It also provides information about the user number. In addition, the user in this section can activate the card to replenish the account.

To configure the Internet, it is common to use the Quick Installation Wizard The procedure consists of three simple steps. All that is required of the user is to follow the indicated instructions. If you know a little about the topic, you can change the settings in the "Settings" section. There are points WLAN, System and Security. To configure the Internet, go to the "WLAN" section, then set the following parameters:

  • SSID - create a name for the network;
  • encryption mode - AES-TKIP;
  • key - create a password;
  • encryption - WPA / WPA2-PSK.

This data will make the modem an access point and distribute the network.

Firmware

The firmware update for the router Megaphone MR100 3 is performed in the “Update” interface tab. Everything is very simple - the device determines whether a new software currently exists. If there is a more recent version, the system will send a special notification and install everything automatically. Of course, experts recommend not to intervene where they are not asked if the device meets your requirements. In other words, it is not worthwhile to improve or modify anything without a specific need.

Unlock

The device must be unlocked if there is a need to use it in conjunction with another provider (not Megaphone). The option is provided by the developer, so the unlock operation itself does not look like something complicated. If the Megafon MR100 3 router is not unblocked, when using an MTS or Beeline card, you will see the word "Blocked" on the instrument panel. In addition, the system will ask the user to enter the unlock code. These codes are sold on the Internet at the lowest price. If it is really important for you to configure this gadget to work with different companies, we recommend buying the code.

In addition, to unlock the modem, you can use the DC Unlocker utility, you can download it for free on the network.