Microsoft does not miss the opportunity to make money on its users. Large funds go to fight piracy. And one of the ways is to create difficulties in the work of counterfeit software. One morning, the user gets up, starts the computer, and detects a blue screen. Actually, this download is completed. But the solution is still there, so you should not despair.

Error correction c0000145 Application Error on Windows.

Denial of responsibility

All recommendations, voiced in the article, are intended to address the operating system emergency. The user performs them at your own risk. Resource nastroyvse.ru is not responsible for harm to personal data on the computer and external media. If in any doubt, contact a qualified craftsman.

Error description

The main reason for this error is the discrepancy between digital signatures of official updates and counterfeit assembly. The problem appeared after the release of the update package on April 14, 2015. One of them - KB3045999 BSOD - blocks further system loading. Traditionally, an error occurs on versions that were activated via third-party software. However, similar messages come from licensed users. If you have an original product, contact Microsoft support. The rest read on. The error occurs only on Windows 7. Newer systems are not subject to such influence, or the error has a different name. So we recommend, if possible, to upgrade to newer versions of Windows.

Ways to troubleshoot the problem

There are only 2. The first one involves the use of the automatic system recovery and startup wizard. The second provides for the manual removal of the notorious update. When the system recovers its functionality, disable automatic downloading of updates. Unfortunately, it won't be possible to get the official seven any more - the countdown of the end of the operating system support is ticking.

Method 1 - Recovery Wizard

To call the wizard, you will need to restart the computer, perhaps even with emergency shutdown. Such a step will cause a window with a 30-second boot mode selection timer to appear. You need to select safe mode using the command line. This is important because it will be much more difficult to call the master in pure safe mode. In the command line interface that opens, enter one of the command options - restrui.exe or X: //Windows/system32/Restore/restrui.exe. The letter X should be replaced with the letter indicator of the system disk. This is usually C, but you may have another. After performing the actions correctly, the wizard window will open, where the following items will be displayed:

First you need to try the launch recovery option. All you need to do - follow the instructions of the utility. If this does not help, the successive search of the system recovery functions or the original image of the operating system will come to the rescue. Make sure that you back up critical data - it can be demolished during the recovery process. Any changes in safe mode are irreversible. It is important to keep this in mind. Return the old version will not work only if you have not recorded it in image format. In case of failure, there is only one option - reinstalling the system.

Method 2 - manual update removal

You can try to remove the update manually using the same wizard. To do this, in the command line you need to indicate the drive letter of the operating system installation and a request for a list of installed updates. It looks like this:

DISM / Image: D: / Get-Packages

After loading the list, look for the line

Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~~ 6.1.1.1

Next, you need to write a single command to delete in the format

dism / image: D: / remove-package /PackageName:Package_for_KB3045999~31bf3856ad364e35~amd64~~6.1.1.1

It is better to register manually, because the mode may be missing a cursor and standard keyboard commands do not work. When complete removal is complete, exit with the exit command and reboot the system. You can proceed to the normal functioning of the seven. Only a little remains - a ban on installing automatic updates.

How to prevent the installation of automatic updates of Windows 7

For a complete ban on updates, you must visit the admin section with the appropriate rights. The option can be run directly or through the System and Security toolkit. In the management section you need to select a list of all services and go down to the bottom of the Update Center. Double click on it to be able to select the type of download “Disabled”. It now remains to stop it and apply the changes. More updates will not be disturbed.

There is another method. In the control panel you need to find a familiar Windows Update. It can be accessed directly or through the System and Security menu. There you need to choose a tool to configure update settings. On the screen that opens, select the context button "Check for updates" and prohibit automatically checking for updates. Depending on the build, the function may look like a manual check or "do not check for updates." It is also necessary to remove the check marks below - consent to receive notifications of new arrivals and permission for any user to update the device. After confirmation, you can return to work. The mode will not prohibit updates, but will allow the user to exclude from the download list those that caused system interruptions.