Nowadays, without the Internet it is very difficult to manage, because the life of every modern person, to one degree or another, is connected with the World Wide Web. Work, study, leisure, entertainment - all this on the Internet. Despite the fact that now almost everywhere there is Wi-Fi, there are still situations when it becomes necessary to go online, when there is no Wi-Fi nearby. Just then a modem comes to the rescue, which will provide you with a fast, mobile connection. In this article we will look at how to connect and configure the MTS modem. Let's figure it out. Go!

The entire setup process is quite simple and will not take you much time. First of all, of course, you need to insert a USB modem into the appropriate connector on the computer. When the operating system automatically detects the device, the autorun window will open, where you will need to click “Run AutoRun.exe”. If you have disabled autorun, run “AutoRun.exe” through “My Computer”.

This will open the installation wizard. Choose your preferred language and click "OK". Next, follow the simple installation wizard.

Before you start, install the modem software

When finished, open the Connect Manager utility via the shortcut that appears on your desktop. After just a couple of seconds, the signal will be recorded. Keep in mind that the signal strength may depend on the position (this applies to some models of modems).

By default, the modem has all the necessary settings so that the user can easily connect to the network. To connect, simply open the “Connect” menu and click on the “Connect” button.

If desired, the user has the ability to perform manual configuration. To manually configure the modem, go to the appropriate section of the program menu. Open the “Network” category to select the signal format - 3G or EDGE / GPRS. Click "Manual" to set the parameters yourself. You can also set a PIN code for increased security by opening the corresponding section of the menu.

To change some additional parameters of the modem, you will have to go to the "Device Manager". Find the item "Modems" in the list and expand it. Then right-click on the device and select "Properties." In the window that opens, you can activate error handling, data compression, and hardware flow control.

Now you will know how to install an MTS 3G modem on a laptop. Write in the comments if you were able to understand the question, share your opinion on the use of modems with other users, and ask everything that interests you on the topic considered.