The most unpleasant nuances when working with Windows should include those that, in general, do not allow to start the operating system. This is often the error 0xc000000e. When confronted with it for the first time, it is rather difficult to understand the causes. And the fight against such problems should be carried out "from several sides." This means that there are several ways to fix the problem. About them will be discussed.

Causes and methods of troubleshooting Windows 0xc000000e.

Possible reasons

There are several main reasons why status 0xc000000e occurs:

1. The computer does not have access to the boot device. This may mean that the boot disk is damaged, not working or not connected. Or there are similar problems with it. That is, 0xc000000e when installing Windows 7 from a flash drive says that the external drive is not in order. Try to connect it to the loaded PC and make sure it is working.
2. There are problems with the boot menu. They are usually caused by severe damage to Windows files or changes in boot parameters. 0xc000000e in Windows 7, how to fix and forget about the error - read on.
3. BIOS settings are not set as expected. The bootable media is set incorrectly, or other parameters do not match the required ones.
4. Other nuances are possible. Independently make an accurate diagnosis will be difficult. Error code 0xc000000e Windows 10 may have its own characteristics, and occur in some special cases.

Debugg

Immediately after the error manifests itself, you need to check the BIOS settings. This can be critical, and can resolve a root fault.

Now about 0xc000000e in Windows 10, how to fix startup problems. If you use several methods of loading at once, including from different disks, check the actual loading parameters. Then came status 0xc000000e? What device is used as a boot? What startup sequence is used by the system? All this is very important.

Check boot disk

A message like “file boot bcd status 0xc000000e” appears. How to fix?

Windows 7 should start from a properly working disk. It is desirable to have at least one backup download method. This may be a boot disk, a flash drive with the image of the system. And even better if you have a spare computer with the same OS. Windows 7 is fault tolerant, but excesses still happen.

Change of priorities

Use a bootable drive. Select it first in boot priority (this can be done in the BIOS). After that, go to the System Restore menu. Error 0xc000000e in Windows 7 should be automatically detected. If everything goes well, Windows 7 itself will respond to the problem. The malfunction will also be resolved automatically.

Are the trains okay?

The method will be relevant for those whose computer is often disassembled. Check whether the hard drive cable is connected as it should. Reconnect it. If the problem persists, try to get a new cable and replace it with the old one. Status 0xc000000e gone? Wonderful.

If nothing helped

There is another solution. Go to Windows 7 System Restore and load the Command Prompt. Here it is necessary to perform 3 operations in turn. Type the following in turn by pressing Enter: Diskpart, select disk 0, list volume. Next, run the Exit command and go to the command prompt again. After that, make active the disk that is used for recovery. Further:

1. Enter cd boot.
2. Enter dir.
3. Finally, type bootsect / nt60 sys / mbr and press Enter.

After that, you need to restart the computer. If everything went well, the state 0xc000000e should no longer bother you.

When mistreated, Windows is able to bring a lot of problems to an unprepared user. The state of the operating system directly depends on how careful you are. If a computer is used in a similar scenario every day, there will be much less reasons for breakdowns. Or vice versa. Error 0xc000000e is rather unpleasant, but as a rule, there is nothing deadly in it.

If you are hampered daily problems in the operating system - read our other articles. From them you will learn how to get rid of even the most complex problems.