The GS-8307 receiver is a complete analog of the GS-8308 and is better in quality than its predecessor numbered 8306. In this device, the design slightly changed, and for the better, an information board appeared and the indicator on the network key was not so bright.

The GS-8307 receiver is a fairly popular model. There is nothing difficult in its firmware if you follow all the instructions.

If the viewer becomes buggy, there are problems in its work, or you just want to update it to the latest version of the system, the output will be a flashing. And we will tell you how the GS-8307 firmware changes so that you can perform it without consulting the specialists, because it will save time and money.

What do you need for flashing?

You will need a computer, a free flash drive and the firmware file itself - you can download it on the world wide web.

Before you start replacing software, pay attention to such recommendations:

• Be sure to format the USB flash drive in FAT32 format.
• Use the firmware that is designed for your model, otherwise you will disable your device, you will have to carry it in for repair. But even this may not help solve the problem.
• Download files exclusively from trusted sources on the global network, look for official archives.

Please note that after reinstalling the software you will not be able to return to the old shell - think carefully about whether you are sure that you need to change the firmware. In addition, if during the installation something goes wrong, you still need to replace the system - there is no possibility of backup, like on a tablet or smartphone.

The main thing is to follow the sequence of actions, especially the process itself is quite simple, even if you are not an advanced user.

Re-flashing receiver GS-8307

So, to replace the software on your device, do the following:

1. Connect the formatted USB drive to the computer and copy the folder with the new firmware to it. Do not change the folder name.
2. Remove the USB flash drive and insert it into the off-GS-8307 receiver.
3. Turn on the device, after which it should see the drive with the new firmware.
4. When the automatic update of the device starts, wait until the process is finished, turn off the receiver.
5. Unplug the drive and restart the device - it will start working with the new software.

How to flash GS-8307 if boot is on? In this situation, the replacement of the security occurs in the same way.

We can conclude that everything is extremely simple. Replacing the firmware takes little time and does not require special knowledge of technology.

So you do not need to carry your device into the service and pay the money to the master - the main thing is to download the desired file and complete all the instructions in order. And if in the future you will experience permanent malfunctions in the operation of the GS-8307 device, simply replace the software in it with the method indicated above. And if it did not help, then you will surely know that you need to contact the experts or buy a new receiver.